不鏽鋼骨釘以70N，鈦合金骨釘以95N的拉力進行靜態彎曲模擬測試分別對

不鏽鋼骨釘以70N，鈦合金骨釘以95N的拉力進行靜態彎曲模擬測試分別對骨密和骨鬆齒骨槽其結果如表5靜態彎曲結果與圖22 (a)骨釘最大變形量(b)齒骨槽最大應變量圖所示。

Kết quả (Anh) 1:

Stainless steel nail to 70N, titanium bone screw to 95N simulation of tensile static bending tests on bone density and bone dentary trough and the results in table 5 static bending results figure 22 (a) nail deformation (b) dentary trough the biggest variable as shown in the figure.

Kết quả (Anh) 2:

Stainless steel pegs with 70N, 95N titanium bone screws to pull the static bending simulation tests on bone density and bone cancellous bone tooth groove whose results are shown in Table 5 static bending results in Fig. 22 (a) pegs the maximum amount of deformation (b respectively ) tooth bone trough maximum strain figure.

Kết quả (Anh) 3:

Stainless steel bone nail to 70N and Ti alloy bone nail 95n pulling force of static simulation of bending test respectively on bone mineral density and bone loose tooth trough bone the table 5 results of static bending and Figure 22 (a) bone nail maximum deformation (b) tooth trough bone maximum stress variables is shown in the graph.