1)本測試總共執行鈦合金(Ti6Al4V)以及不鏽鋼(SUS 316L

1)本測試總共執行鈦合金(Ti6Al4V)以及不鏽鋼(SUS 316L)骨釘各3支樣品與市售品進行實質相等性比較，發現本研究設計、製造之骨釘發生塑性變形，但沒有斷裂。在最大負載方面：該設計之產品鈦合金平均約為89.3N，不鏽鋼平均為65.4N，而市售產品L品牌(Ti Alloy)為62.4N；勁度方面：該設計之產品鈦合金(Ti6Al4V)平均為172N/mm，不鏽鋼(SUS 316L)平均為268.4N/mm，而市售產品L品牌為102.7N/mm

Kết quả (Anh) 1:

1) this test conducted titanium alloy (Ti6Al4V) and stainless steel (SUS 316L) screw the 3 samples for substantive equality comparison with commercially available products, found the study design, manufacture of nail plastic deformation, but did not break. In terms of maximum load: the design of the product average about 89.3N of titanium alloy, stainless steel 65.4N on average, and marketed products l brands (Ti Alloy) of 62.4N for stiffness: the design of titanium alloy (Ti6Al4V) average 172N/mm, stainless steel (SUS 316L) average of 268.4N/mm and sale products l brands as 102.7N/mm

Kết quả (Anh) 2:

1) The total test execution Titanium (Ti6Al4V) and stainless steel (SUS 316L) pegs each three samples of commercially available products with substantive equality comparisons, this study found that the design, manufacture of bone screws plastic deformation, but not broken. In terms of maximum load: The design of the product titanium averaged about 89.3N, stainless steel averaged 65.4N, while commercial products L Brand (Ti Alloy) is 62.4N; stiffness aspects: the design of the product of titanium alloy (Ti6Al4V) an average of 172N / mm, stainless steel (SUS 316L) averaged 268.4N / mm, and a commercially available product L brand 102.7N / mm

Kết quả (Anh) 3:

1) test the total execution of titanium alloy (Ti6Al4V) and stainless steel (Sus 316L) bone nail and 3 branch samples with the city sold goods substantially equivalent, found the research and design of the bone nail plastic deformation occurred, but does not break. In the maximum load: the design of titanium alloy products are, on average, about 89.3N, so average for 65.4N, and commercially available products brand L (Ti alloy) for 62.4N; stiffness aspects: the design of the products of titanium alloy (Ti6Al4V) average for 172N/mm. (Sus 316L) stainless steel average 268.4N/mm and commercially available products L Brand 102.7N/mm